Model No.: HXGF30-100
HXGF Shaft Mounted Gear Reducer is our company new design product.
For offering better choice according to our market tendency.
The better material are choosed by us for better use of our customers.
1) All torque arms/fulcrums are plated to eliminate them being rusted in use.
2) The shaft mounts have labyrinth sealing on the conveyor end and input shaft end so that the oil seal is safe from contamination.
3) The front end of the shaft mount has a hub cover to protect the front oil seal as well as moving part of the gearbox.
4) Input shaft front bearing is a roller bearing as it takes in more radial load from the belt pressure.
5) Breather plugs are extended so that the dust does not clog the breather hole.
6) All oil seals imported from Taiwan.
7) Our gear units now have higher load capacity as the gears have been redesigned.
8) All gears are case carburised to a casedepth and ground inhouse.
9) All gear units are machined on a CNC machining center so are very accurate in alignment.
10) Finish of all gear units are far superior to any other brand being sold out of India.
11) The shaft mounts are available with keyed hollow shafts or hollow taper bores with taper clamps.
1. Screw conveyors, belt conveyor bulk handing machinery and process equipment for: Baggage handing.
2. Aggregate and mining.
3. Mixers and process equipment.
4. Grain and agriculture.
One piece packed in one small box, 7- 8 small boxes paced in one wooden carton with pallet
Test & Certification
Hengfengtai products passed rigorous performance test.
Certifications: CE, TUV, ISO9001, ISO14001
Zhejiang Hengfentai Reducer Mfg. Co., Ltd was established in 1991, with the development of more than 23 years, we have accomplished the following achievements:
Main product: With gear reducer and gearbox products as leading, extend to Electrolytic aluminum equipments, Mixing equipments, Precision transmission equipments, Environmental protection equipments and so on large machinery equipments.
R&D: Participated in 863 National Plan, mainly responsible for industrial robot joint reducer, as well as solar tracking reducer.
Factory Scale: Currently 2 factory plants: Sanxi industry zone and Binhai industry zone, with totally 500 personnel, and advanced equipments & machines.
Welcome to visit our company!
After 300-hour operation, please change the oil, and flush the gear uint with suitable detergents.
Please do not mix the mineral oil and synthetic oil.
Please check the oil level in regular time.
Welcome to contact Sherry Ye for more details!
|Standard size of shaft||30||40||50||55||65||75||85||100|
|Alternative size of shaft||40||50||55||65||75||85||100||120|
|Input shaft keyway||6x3.5x50||6x3.5x59||8x4x63||8x4x70||10x5x70||12x5x90||14x5.5x100||16x6x100|
Contact us if you need more details on Gear Reducer. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Gear Box、Speed Reducer. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : HXG/HXGF series-Shaft mounted gearboxes