YGKJ560 Model 1-1.5t/h Wood Pellet Mill Machine
Basic Info
Model No.: YGKJ560
Product Description
>> New Type Wood Pellet Machine in Wood Pellet Production Line:
ROTEXMASTER New Designed Vertical Centrifugal Ring Die Wood Pellet Machine is a domestic latest pellet machine at present .
It adopt the large modulus hardened surface Helical Gearbox , main shaft reinforcement , Power output is strong , Good stability , Low failure rate ,Low production cost, so it is the first choice machinery for biomass energy industry .
New type vertical ring die wood pellet machine used in wood pellet production line has the following advantages:
High automation, No need to take care
(1) In the process of machine running , Feeding speed can be adjusted automatically according to the running current of the equipment, enlarging capacity , reduce the electricity cost ,because this can avoid the equipment due to material`s too fast feeding speed caused boring machine and other issues. Especially multiple machines works together , this can save some workers who take care of electric current .
(2) During the operation of the equipment, Through the control panel and the boss phone we can clearly see the equipment running the temperature, including the roller bearings, mold, motor, gearbox and the main shaft temperature, but also clearly see the current and stability of equipment operating . Timely warning and necessarily stopping machines.
This can get a great protection of the equipment parts ,improve lifetime and reduce losses.
Independent lubrication and non-independent lubrication can be switched in two ways
(1) Roller bearings: In the whole roller life cycle, you can choose no need to fill the oil and replace the bearing way . You can also choose to control the oiling way at any time according to the oil pressure. Both ways have advantages and disadvantages, according to the customer use the location and manner to switch them .
(2) Main shaft lubrication: we adopt the Gear Box oil lubrication, while reducing the temperature of main shaft and play a full lubrication.
Reducer drive strengthen
(1) The machine adopts parallel helical gear drive, good tooth fit.
(2) The gear box adopts the hardened surface helical gear, the tooth surface is widened, the modulus is increased, the gear coincidence degree is large, the load of each pair gears is reduced, and the bearing carrying capacity of the gear is improved, which is more 5-10 times than that of the traditional gearbox gear.
(3) Reducer Lubricant with bypass water cooling system to avoid oil temperature is too high, greatly enhance the internal bearing life
(4) Failure rate is lower than the traditional reducer, at least 5 years will be used to produce a failure, greatly reducing the cost of production
>> Introduction for Wood Pellet Production Line
| Biomass Wood Pellet Production Line | |
| ROTEXMASTER Drum Wood Chipper
If the clients raw materials are wood logs,we suggest you use wood chipper,but please kindly note it,your raw materials max diameter must be allowed by our wood chipper max diameter(from 23cm to 35cm),it grind the wood logs into wood chips(Size:30*30*10mm). |  |
| ROTEXMASTER Double-motor Hammer Mill
The hammer mill is the main machine in grinding section, it grinds the wood chips, small wood waste, wood branches,sticks(Size:30*30*10mm) into wood sawdust (5mm-8mm),if your raw materials are EFB,coconut shell,packed straw stalk etc.,you could use the composite crusher or stump crusher to crushing your raw materials. | |
| ROTEXMASTER Rotary Dryer
For making pellets,the suitable moisture for raw materials are 15%,if your raw materials are not in this range,you need the dryer to dry the raw materials.[ROTEX MASTER]rotary dryer has the wide market in Southeast Asia,Europe. | |
| ROTEXMASTER Vertical Ring Die Pellet Machine
The biomass wood pellet machine is an efficient biomass pellet making machinery,the pellets standard as follows: 1.the wood pellet diameter 4-12mm wood pellets , usually 6mm for Europe, 8 mm for Korea and 8-10mm for china. the pellet diameter and length can be adjusted according to your demand . 2. pellet moisture is 8%-10%, 3. density >1.1, completely satisfy DIN standard | |
| ROTEXMASTER Counter Flow Cooler
Cooling section is one of the most sections in the wood pellet production line,because the wood pellets temperature from wood pellet machine is 80-90 ℃,the clients could choose the counter flow cooler and cooling silo for cooling wood pellets,after the cooling,the wood pellets have good density and beautiful surface,improve selling | |
| ROTEXMASTER Packing Machine
The packing machine has two types,one is packing range 5-50kg/h,another is LCS-MT,you could choose any type of them according to your actual requirements | |
>> Picture Show of Wood Pellet Production Line
Product Categories : Wood Pellet Machine > Wood Pellet Mill